Technical Specifi Cations; Ce Declaration And Requirements; Technical Information - Sunrise Medical Quickie Puma 40 User Manual

30
9 Technical specifi cations

9.1 CE declaration and requirements

This product complies with the COUNCIL DIRECTIVE 93/42/EEC of 14 June 1993
concerning medical devices. The product also meets the following requirements and standards. This
has been verifi ed by independent test organizations.
EU guideline
93/42 EEC
NEN-EN 12182
NEN-EN 12184
(2009) Class B
ISO 7176-8
ISO 7176-9
ISO 7176-14
ISO 7176-19
(2008)

9.2 Technical information

The electric wiring diagram varies according to the type of controller used (
Maximum battery dimensions
Battery capacity
Maximum permissible charging voltage
Maximum charging current
Connector type
Insulation
Requirements as stated in Appendix 1 apply
Sunrise Medical declares under its sole responsibility that
this product is in conformity with the requirements of the
directive 93/42/EEC amended by 2007/47/EEC.
The EN 12182 requirements as stated in NEN-EN 12184
(2009): Technical aids for disabled persons - General
requirements and test methods October 1999
Electrically powered wheelchairs, scooters and their
chargers - Requirements and test methods October 2009
Requirements and test methods for impact, static and
fatigue strengths July 1998
Climatic tests for electric wheelchairs IPX4
Requirements and test methods for power and control
systems for electrically powered wheelchairs 1997
The Puma 40 meets the crash test requirements as
described in ISO 7176-19 (2008)
Sunrise Medical declares that this product fulfi ls the
performance requirements for a "Crash Test" to ISO 7176-
19.

260 x 172 x 210 (10.2 x 6.8 x 8.3)
40 / 60 / 74 GEL
24
12

Controller
Class 2 double insulated
Puma 40
n/a
160 kg (25.2 st.)
160 kg (25.2 st.)
n/a
n/a
n/a
102 kg (16.1 st.)
Controller).
mm (inch)
Ah
V
A (rms)