100 | Service instructions
100 | Service instructions
5.2.20
Adjusting the centre point of gravity
Preparation
Switch off the wheelchair via the remote control.
Instructions
• Remove the leg rests.
• Loosen the 4 bolts.
• Move the whole chair unit to the correct position.
• Remount the 4 bolts.
• Replace the leg rests.
Notice
Changing the wheelchair's centre of gravity may negatively
infl uence the wheelchair's driving characteristics and/or its
dynamic stability! Therefore it might be sensible to use the
RWD hole for a FWD and vice versa
1
Note! Suitable work area required!
3
Note! Lift the chair in case the wheel chair has an electrical lift.
Relevant article numbers
9002592 M8x12 CKS BZK PRECOTE 85
00000.2003 Locking ring, fl at M8
Tools used
Allen key, 6 mm
Icons
Parts need to be replaced. Dispose of waste parts
in accordance with local regulations.
Note! Be aware of the issue!
2
4
Puma 20/40