Removing A Memory Upgrade Module - Fujitsu Lifebook S751 User Manual

6
Insert the memory upgrade module at a 45° angle. Press the connector edge of the module firmly down and
into the connector until it lodges under the retaining clip. You'll hear a click when it is properly in place.
7
Replace the cover and reinstall the screws.
T
HE MEMORY UPGRADE MODULE IS NOT SOMETHING YOU ROUTINELY REMOVE FROM YOUR NOTEBOOK
O
NCE IT IS INSTALLED
CAPACITY

Removing a Memory Upgrade Module

1
Perform steps 1 through 3 of Installing a Memory Upgrade Module.
2
Pull the clips sideways away from each side of the memory upgrade module at the same time.
3
While holding the clips out, remove the module from the slot by lifting it up and pulling it away from your
notebook.
(Figure 24)
4
Store the memory upgrade module in a static guarded sleeve.
5
Replace the cover and reinstall the screws.
Figure 22. Opening Memory Compartment
,
YOU CAN LEAVE IT IN PLACE UNLESS YOU WANT TO CHANGE SYSTEM MEMORY
.
73
.