Checking The Memory Capacity - Fujitsu Lifebook S751 User Manual

1
Retaining Clip
Figure 23. Inserting a Memory Module

Checking the Memory Capacity

Once you have changed the system memory capacity by replacing the installed module with a larger one,
be sure to check that your notebook has recognized the change.
Check the memory capacity by clicking [Start] -> Control Panel, then (while in Category view) clicking
the System and Security icon. Select the System icon and check the amount of memory next to "Installed
memory (RAM):".
The actual memory size and what is displayed may vary. This is possible if your system is configured with
a graphics controller which dynamically allocates system memory to accelerate graphics performance.
I
F THE TOTAL MEMORY DISPLAYED IS INCORRECT
PROPERLY INSTALLED
CORRECTLY RECOGNIZED
2
Alignment Key
. (I
F THE MODULE IS PROPERLY INSTALLED AND THE CAPACITY IS STILL NOT
, T
SEE ROUBLESHOOTING ON PAGE
74
3
2
1
Figure 24. Removing a Memory Module
,
CHECK THAT YOUR MEMORY UPGRADE MODULE IS
83.
1