Safety And Warnings - Kogan KABRDMAKSSA User Manual

SAFETY & WARNINGS
Ensure to read all instructions in this user guide prior to first use. Retain this user guide for
future reference.
WARNING: Keep the ventilation openings in the appliance enclosure
and the built-in structure clear of obstructions.
• This bread maker can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the
bread maker in a safe way and understand the hazards involved.
• Children shall not play with the bread maker.
• Keep the bread maker out of reach of children under 8 years to avoid risk of scalds,
burns or electric shock.
• Cleaning and user maintenance shall not be made by children without supervision.
• This bread maker is intended for indoor household use. Do not use the bread maker
outdoors or for any other purpose.
• This bread maker has a working voltage of 230-240V and frequency of 50Hz.
• To protect against risk of electric shock, do not pour water on the power cord, plug or
openings of the bread maker.
• Do not immerse the bread maker into water or any other liquid.
• Do not place the bread maker on wet or slippery surfaces.
• Do not place the bread maker near gas burners, electric ovens, or other heat sources.
• Do not place the bread maker on or near any flammable items (for example, paper,
curtains, tablecloths, etc.).
• Do not insert metal objects into the bread maker. Doing so may cause fires, short
circuits, and severe injuries to users.
• Do not touch the inside of the bread maker immediately after use as the residual heat
may cause burns. Wait for the bread maker to cool before touching.
• Do not cover the openings of the bread maker while in use.
• If the display shows 'HHH', the bread maker is overheating. Unplug it immediately and
open the lid, leaving it to cool down completely before next use. This may occur if
insufficient time was left between baking cycles.
• Do not let the power cord come into contact with heat sources or sharp edges as this
could cause damage.