Removing & Installing Body Components
Battery
Rubber strap
Positive terminal
#
Removal
Make sure the ignition switch is in the
(Off) position.
Remove the battery cover.
1.
Unhook the rubber strap.
2.
Disconnect the negative - terminal from
3.
the battery.
82
Negative terminal
Battery
P. 83
2
Disconnect the positive + terminal from
4.
the battery.
Remove the battery taking care not to
5.
drop the terminal nuts.
#
Installation
Install the parts in the reverse order of removal.
Always connect the positive + terminal first. Make
sure that bolts and nuts are tight.
Make sure the clock information is correct
after the battery is reconnected.
The anti-theft alarm system will be
deactivated if the battery is disconnected.
The system will remain off when the battery is
reconnected.
To activate the system, turn the ignition switch to
the (On) position once.
For proper handling of the battery, see
"Maintenance Fundamentals."
"Battery Goes Dead."
P. 24
2
P. 72
2
P. 122
2