Table of Contents
Advertisement
Operation Manual / TPL65VA32 / VA33
8 Disassembly and assembly / 8.9 Installing cartridge group
© Copyright 2020 . All rights reserved.
Remove the cover from the oil connection.
u
Fit flange (42044) with screws (42054) and new gasket (42045).
u
Attach one lifting gear each to the two fins of the bearing casing
u
provided for this purpose.
Remove supports (90450) and carefully insert cartridge group.
u
Uniformly tighten the screws (61059) together with the Verbus Ripp®
u
washers (61058).
CAUTION
If there is no or insufficient clearance between the rotor turbine blades
and the turbine diffuser, the blades and the turbine diffuser (casing)
can be damaged.
Check that the blades do not rub on the turbine diffuser by rotating
u
the rotor.
Remove the lifting gear.
u
Fit O-ring (42012).
u
Screw in the speed sensor (86505) together with the O-ring (86506)
u
and plug in the cable connector (86515).
HZTL2464_EN
Rev.E
March 2020
Advertisement
Table of Contents
