Table of Contents
Advertisement
Operation Manual / TPL65VA32 / VA33
8 Disassembly and assembly / 8.5 Removing cartridge group
© Copyright 2020 . All rights reserved.
Unplug cable connector (86515) and unscrew speed sensor (86505)
u
with O-ring (86506).
Remove the O-ring (42012).
u
Remove the three screws (61059) together with their Verbus Ripp®
u
washers (61058).
Attach one lifting gear each to the two fins of the bearing casing
u
provided for this purpose.
Evenly press off cartridge group by screwing press-off screws
u
(90900) into the designated holes.
CAUTION
If the rotor blades have insufficient or no clearance, the blades and cas-
ing could be damaged.
Check that the blades do not rub on the turbine diffuser by rotating
u
the rotor.
HZTL2464_EN
Rev.E
March 2020
Advertisement
Table of Contents
