Stopping The Engine - ABB HT596419 Operation Manual

Operation Manual / TPL65VA32 / VA33
4 Operation / 4.6 Stopping the engine
Detail A

4.6 Stopping the engine

© Copyright 2020 . All rights reserved.
In the event of failure of the control system or the drive, the variable tur-
bine geometry module can be fixed by clamping the ring lever (B) using
at least 3 washers (C) spaced around the circumference.
When fixing, the position of the variable turbine geometry module and /
or the blades must be specified by the enginebuilder.
CAUTION
Stopping the engine
Heat in the turbocharger must be dissipated by the further circulating
lubricating oil.
Allow the engine to continue running at idling speed for a further 10
u
minutes before stopping.
HZTL2464_EN Rev.E March 2020