Table of Contents
Advertisement
SECTION 9
9. Installation Handover
Once the installation has been successfully completed and tested, it is important for the
installer to explain the operation and safety requirements of the system.
NEVER ASSUME THE USER KNOWS HOW TO SAFELY OPERATE THE SDO4 SMART.
Neither Centurion Systems (Pty) Ltd, nor its subsidiaries, accepts any liability caused
by improper use of the product, or for use other than that for which the product was
intended.
Ensure that the user is in possession of the user guide and that you have
completed the installation details in the back of the user guide.
The following needs to be understood by the user:
•
How to operate the manual release mechanism. (Show them how by demonstration)
•
How the obstruction detection and all other safety features work. (Show them how by
demonstration)
•
All the features and benefits of the operator, i.e. Beams, etc.
•
All the safety considerations associated with operating an automated garage door.
The usershould be able to pass this knowledge on to all other users of the automated
system and must be made aware of this responsibility.
•
Do not activate the garage door operator unless you can see it and can determine
that its area of travel is clear of people, pets, or other obstructions
•
NO ONE MAY CROSS THE PATH OF A MOVING GARAGE DOOR. Always keep people
and objects away from the gate and its area of travel
•
NEVER LET CHILDREN OPERATE OR PLAY WITH THE GARAGE DOOR CONTROLS, and
do not allow children or pets near the garage door area
•
Be careful with moving parts and avoid close proximity to areas where fingers or
hands could be pinched
•
Secure all easily-accessible garage door operator controls in order to prevent
unauthorised use of the garage door
•
Keep the automated garage door system properly maintained, and ensure that all
working areas are free of debris and other objects that could affect the garage door
operation and safety
•
On a monthly basis, check the obstruction detection system and safety devices for
correct operation
•
All repair and service work to this product must be done by a suitably qualified person
•
This product was designed and built strictly for the use indicated in this
documentation. Any other use, not expressly indicated here, could compromise the
good condition/operation of the product and/or be a source of danger!
Centurion Systems (Pty) Ltd does not accept any liability caused by improper use of
the product, or for use other than that for which the automated system was designed.
Ensure that the customer is in possession of the User Guide and that you have
completed the installation details in the back of the User Guide.
page 48
INSTALLATION HANDOVER
www.centsys.com
Hide quick links:
Advertisement
Table of Contents
