SA-VK870EE
Step 5 Remove 2 screws at chassic supports.
Step 6 Remove 4 screws at the rear panel.
Step 7 Lift up the D-Amp P.C.B. together with the chassic
support as arrow shown.
Step 8 Remove 3 screws from D-Amp P.C.B..
Step 9 Lift up D-Amp P.C.B. as arrow shown.
Step 10 Position Mechanism unit (CR14) according to the
diagram show.
Step 11 Connect 50P FFC cable at the connector (CN2801) on
Main P.C.B..
Step 12 Connect 11P FFC cable at the connector (CN2805) on
Main P.C.B..
Step 13 Connect 5P cable at the connector (CN8002) on USB
P.C.B..
76