Disassembly Of Rear Panel - Panasonic SA-VK870EE Service Manual

SA-VK870EE
Note 1: For disassembly & assembly of traverse unit, please
refer to original Service Manual for the Disassembly and
Assembly of the Mechanism Unit (CR14).
Note 2: During reassembling
Mechanism Unit (CR14), is seated properly at the locators.
9.6.

Disassembly of Rear Panel

• • • • Follow the (Step 1) to (Step 5) of Item 9.4
• • • • Disassembly of Rear Panel
Step 1 Remove 10 screws at rear panel.
Step 2 Detach 2P cable at connector (CN2810) on Main P.C.B.
procedure, ensure the
46
Step 3 Slightly lift up the Mechanism Unit (CR14) from the two
locators.
Step 4 Release 2 catches from the side panel.
Step 5 Remove the rear panel in the direction of arrow.