Panasonic SA-VK870EE Service Manual page 36

SA-VK870EE
Error
Diagnosis Contents
Code
PDRV Cam gear/gear
assembly abnormal
UDU UD base assembly
abnormal
UDD UD base assembly
abnormal
UD1 UD base assembly
abnormal
F1NG Fail - safe mode.
(For open/close tray
unit(s))
F2NG Fail - safe mode.
(For open/close tray
unit(s))
RSET Cam gear jam/close
sensor faulty
Description of error
Cam gear does not move from
"HOME" to "PLAY" drive
position.
UD base assembly does not
move upwards from tray 5 to
tray 2.
UD base assembly does not
move downwards from tray 1
to tray 5.
UD base assembly does not
move to tray 1.
When the tray open operation
is performed, it fails to open. It
will automatically close all
trays after the time-out by the
microprocessor. During this
time when it fails, the error
code will appear.
When the tray open operation
is performed, it fails to close. It
will automatically close all
trays after the time-out by the
microprocessor. During this
time when it fails, the error
code will appear.
During tray re-open, the cam
gear will rotate in the opposite
direction to reset the cam gear
position. When it fails, the
error code will appear.
Automatic FL Display
Error code
Sequence of errors
Error code
Sequence of errors
Error code
Sequence of errors
Error code
Sequence of errors
36
Remarks
For CD/DVD changer unit (CR14).
Press [EXCHANGE] on main unit
for next error.
For CD/DVD changer unit (CR14).
Press [EXCHANGE] on main unit
for next error.
For CD/DVD changer unit (CR14).
Press [EXCHANGE] on main unit
for next error.
For CD/DVD changer unit (CR14).
Press [EXCHANGE] on main unit
for next error.
For CD/DVD changer unit (CR14).
Press [EXCHANGE] on main unit
for next error.
For CD/DVD changer unit (CR14).
Press [EXCHANGE] on main unit
for next error.
For CD/DVD changer unit (CR14).
Press [EXCHANGE] on main unit
for next error.