Step 3 Remove 1 screw.
Step 4 Remove TR Spring.
Step 5 Remove the Audio Digital Amp IC (IC5400).
Caution: During replacement of the part, avoid touching
the heatsink, it may lead to injuries.
9.29.1. Assembly of Audio Digital Amp IC
(IC5400)
Step 1 Install the Audio Digital Amp IC (IC5400) on to D-Amp
P.C.B..
Step 2 Screw back TR Spring to hold the Audio Digital Amp IC
(IC5400) onto the Heatsink.
Step 3 Solder the pins of Audio Digital Amp IC.
Step 4 Use a blower to remove any minute particles after the
screwing of TR Spring.
Caution: Ensure pins of the Audio Digital Amp IC (IC5400)
are properly inserted and soldered on D-Amp P.C.B..
9.30. Disassembly of Rear Panel
• Refer to "Disassembly of Side Panel L & R".
• Refer to "Disassembly of Top Cabinet Unit".
Step 1 Remove 10 screws.
74