First And Quick Start Of Device; First Start Of The Device - Honeywell CENTRA LINE WEB-HMI4/C User Manual

WEB-HMI4/C, WEB-HMI7/C, WEB-HMI7/CF, WEB-HMI10/CF, WEB-HMI16/CF AND WEB-HMI21/CF - USER'S MANUAL (SW)

FIRST AND QUICK START OF DEVICE

After starting up the device for the first time, you are located on the settings page.
Therefore, user need to login to the Setup menu to configure the device. By default,
the username and password are admin.
After entering the configuration menu for the first time, the user is forced to change
the admin password. This password must follow security requirements and must be
remembered all the time to be able to change the configuration of the device.
New password: _____________________________________________________
Confirm the new password in the Confirm Password box. Select Change Password.
The 'admin' password will be changed and the device will now reboot.
The new password will be required to change the configuration of the device.
IMPORTANT: DO NOT FORGET THE NEW PASSWORD. A forgotten
password cannot be cleared or reset. If you forget the 'admin' password,
contact CentraLine Technical Support.
Wait for the device to reboot and display the Login screen again.
Enter 'admin' in the Username box.
5

First start of the device

EN2Z-1077GE51 R0621