Operating Manual
This thermostat is ready to go
Simply perform the three steps below and the thermostat is in operation:
© Set the clock
See page 7
© Select whether to heat or cool
See page 8
© Select whether to keep the fan on continuously or only when needed
See page 9
Your thermostat is pre-programmed with Energy Star® settings (see page 11). If you do not wish to use
these settings, you can:
►
Modify the schedule and temperature setpoints
See page 12
►
Temporarily override the temperature setpoint
See page 14
►
Permanently override the temperature setpoint
See page 15