Table of Contents
Advertisement
WEB-HMI4/C, WEB-HMI7/C, WEB-HMI7/CF, WEB-HMI10/CF, WEB-HMI16/CF AND WEB-HMI21/CF - USER'S MANUAL (SW)
OPEN THE SYSTEM SETTINGS MENU
The system settings menu is entered after powering on the device and entering
valid credentials "Username" and "Password" into the login mask.
The main topics of configuration are listed on the left side of the system settings
screen.
WEB BROWSER
Localisation
System
Logs
Date and Time
Network
Services
Management
Display
Fonts
Authentication
Restart
Web Browser
Exit
Use to set the language used for the text in the System Settings screen only. Select
the required language from the listed options.
County Code:
Select from the listed options. Required for WLAN regulatory domain.
System keyboard layout:
Use this option to change the layout of the virtual keyboard according to the
required language. The default keyboard layout is American English.
NOTE: The "Localisation" option does not affect the language of any other web
browser content.
9
Setup the language of the device
System information, Status and Timers
Configure logfile generation
Configure the date and time of the device
Configure the network settings of the
Ethernet interfaces
Use to enable the network bridge
Firmware updates and basic FW and
booter configurations
Display setup like colors, timeouts and
touchscreen calibration and more
Use to install additional fonts
Change passwords or create SSL
certificates
Restart the main or config OS
Configure the web browser properties like
home page
Will close the system settings view
EN2Z-1077GE51 R0621
Localisation
Advertisement
Table of Contents
