Electronic Control On Unit Tc Plus - Ferroli JOLLY Plus 2 User Manual

Electronic Control on unit TC Plus

General information
This control makes the room temperature adjustment
completely autonomous (with adjustable offset
keyboard) through AUTO, SILENT, NIGHT and MAX
pictograms by means of a probe located in the lower
side of the device ensuring anti-freeze safety even
when set to stand-by .
The control panel has its own memory, therefore no
settings will be lost in case of shut-down or power
outage .
The controls cannot be installed VN / VO / VI
versions .
A Display
B Keys
Display
The display also offers information on the statuses and on any active alarms through 8 specific symbols:
Automatic operation
Silent operation
Maximum ventilation speed
Night function
Heating on
Keys function
You can set the various functions through the 8 backlit keys:
+
Temp + allows
temperature
-
Temp + allows
temperature
Heating / Cooling:
between heating and cooling
The ventilation speed will be adjusted
automatically between a minimum and a
maximum value .
ELECTRONIC CONTROL ON UNIT TC PLUS
via
A
increasing the set
decreasing the set
allows switching
After 20 seconds from the last action the panel
brightness will be reduced to increase the comfort
during night use and on the display will appear
the room temperature . Press any key to restore
maximum brightness .
The 10 kΩ water temperature probe located in the
device battery can manage the minimum in heating
(30 °C) and maximum in cooling (20 °C) functions .
Cooling on
Supervision on . Flashing with CP
presence contact closed .
Alarm indication (light on)
Panel off indication
Resistance enabled indication
Night function: the ventilation speed is
significantly reduced
temperature is changed automatically
Operation at maximum speed: allows
setting he maximum ventilation speed
ON/Stand-By: allows activating or putting
the device in stand-by mode .
Silent: allows limiting the ventilation speed
by reducing its maximum value
B
and the set
7