Cleaning The Filtering Plates; End Of Operations - Ferroli JOLLY Plus 2 User Manual

MAINTENANCE

Cleaning the filtering plates

- remove the dust from the filter with a vacuum cleaner (Fig.6 ref. A)
- rinse the filter (Fig.6 ref. B) under running water, without using detergents or solvents, and allow to dry.
- Replace the filter on the fan coil unit (Fig.6 ref. A), making sure to insert the bottom edge (Fig. 6 ref. B) in its place
(Fig . 6 ref . C) .
Do not use the unit without the mesh filter.
- The unit has a safety switch that prevents operation of the fan with or without the movable panel or when
it is badly positioned .
After cleaning the filter, check correct fitting of the panel.
Fig .6

End of operations

- Place the movable panel in its place parallel to the front panel and press to secure (Fig .7) .
The Manufacturer declines any liability for inaccuracies contained in this manual, if due to printing or copying errors .
The Manufacturer reserves the right to make changes and improvements to the catalogue products at any time without notice .
18