Fujitsu Lifebook E342 Manual page 71

S e c t i o n T h r e e
10. The software will automatically detect the
new devices and place them online.
Note: The software will always re-detect both
devices even if you only swapped one device or
you decided not to swap any devices at all.
11. All drive letters associated with both devices
will be re-created and listed under 'My
Computer' and 'Windows Explorer' .
12. The 'Taskbar Icons' and 'ToolTip Balloons'
will be updated to reflect the new devices
inserted in the bays.
If you happen to press the 'OK' button before
inserting a device into Multi-function Bay 1,
Tioman will display the following message:
No device detected in Bay 1.
Please insert a device before
clicking the Continue button.
You must insert a device into Multi-function
Bay 1 to continue at this point. If you choose
to cancel the warning message, Tioman will
prompt you to insert a device in Multi-function
Bay 1 the next time the 'Swap Devices'
command is run.
62
C A U T I O N
Make sure whenever you use Agate
Tiomon Hot-Swap software that you
always have at least one battery installed
in either Multi-function Bay of your
E Series notebook when you are running
on battery power alone. If you swap the
Primary Battery without having a
Secondary Battery installed in the other
Multi-function Bay, the system will lose
power once the Primary Battery is
removed when you are running on battery
power alone. It is always safe to hot-swap
your E Series Bay Devices when you are
powering the system with the AC adapter.
C A U T I O N
You should never leave your Multi-func-
tion Bays empty when the notebook is in
operation. The Weight Saver is intended
to occupy Multi-function Bay 2 when no
other device is needed.
C A U T I O N
Due to the implementation, design and
configuration of the Second Hard Drive
and SuperDisk 120 Drive they have hot-
swap limitations when the system is
booted with these devices installed in
either Multi-function Bay. Please consult
the documentation that comes with your
Optional SuperDisk 120 Drive and/or
Optional Second 6.4GB hard drive for
specific information on how to properly
configure and use these devices with
Agate Tioman software.
P O I N T
If the CD-ROM, DVD-ROM, 2nd Hard
Drive and Zip Drive are swapped into the
system simultaneously with the Floppy
Disk Drive, the Multi-function Bay 2
devices will always take the D: drive
letter designation in 'My Computer'
and 'Windows Explorer'.