Fujitsu Lifebook E342 Manual page 143

S e c t i o n F i v e
Other PC Cards that conform to PCMCIA
2.1 or CardBus standards.
For further information, refer to the instruc-
tions supplied with your PC Card.
Caring for PC Cards
PC Cards are durable; however, you must treat
them with care. The documentation supplied
with your PC Card will provide specific infor-
mation but you should pay attention to the
following points:
To keep out dust and dirt, store PC Cards
in their protective sleeves when they are not
installed in your notebook.
Avoid prolonged exposure to direct sunlight
or excessive heat.
Keep the cards dry.
Do not flex or bend the cards, and do not
place heavy objects on top of them.
Do not force cards into the slot.
Avoid dropping cards, or subjecting them
to excessive vibration.
136
PC Card Lock
Eject Button Slot 2
Eject Button Slot 1
Figure 5-10 Installing and Removing a PC Card
P O I N T
Windows NT 4.0 does not support
Zoomed video cards.
Installing or Removing PC
Cards in Your Notebook
PC cards are installed in the PC Card slot in the
left side panel of your notebook. Some PC Cards
will not work when all possible devices are
enabled. If a PC Card is not recognized, you will
need to open the Control panel, the System fold-
er, and then the Device Manager, and choose a
device to disable so that the resources can be
used by the PC Card.
C A U T I O N
Do not insert a PC Card into a slot if there
is water or any other substance on the
card; you may permanently damage the
card, your notebook, or both.