Floppy Disk Drive; External Installation Of A Floppy Disk Drive - Fujitsu Lifebook E342 Manual

S e c t i o n F i v e
EXTERNAL INSTALLATION
OF A FLOPPY DISK DRIVE
To install a floppy disk drive externally,
you must mount the modular floppy disk drive
in the optional external adapter and attach the
external adapter to the connector on your
notebook.
To connect a floppy disk drive externally:
1. Close all files and exit all applications.
2. Mount the floppy disk drive in the external
adapter by aligning the connector ends and
pushing the drive into the external adapter
until it clicks into place.
3. Open the external floppy disk drive port
cover on the left side panel of your note-
book, (see Figure 5-11), by gently pulling
on the right side of the cover and then
tilting it open.
4. Align the connector of the external floppy
disk drive adapter with the connector
towards the body of your notebook with the
wide side of the connector up. (Figure 5-11)
140
6. Insert the connector of the external floppy
disk drive adapter firmly into the port on
your notebook until it clicks.
To disconnect an external floppy disk drive:
1. Close all files and exit all applications
2. Squeeze together firmly on the release but-
tons on either side of the external floppy
disk drive connector next to the body of
your notebook. (Figure 5-11.)
3. Pull the connector free.
4. Close the floppy disk drive port cover on
your notebook and press it shut until
it latches.
5. Remove the floppy disk drive from the
external adapter.
External Floppy Disk
Drive Port
External Floppy Disk
Drive Connector Cover
Connector
Release Button
Figure 5-11 External Installation of a Floppy Disk Drive.
External Floppy
Disk Drive