Fujitsu Lifebook E342 Manual page 141

S e c t i o n F i v e
C A U T I O N
Data may be lost and/or system errors
introduced if the warm-swap is not
performed quickly or a power adapter
is not installed.
C A U T I O N
The bridge battery can not support an
operating notebook. The notebook must
be in Suspend mode.
Under federal, state or local law it may be illegal
to dispose of batteries by putting them in the
trash. Please take care of our environment and
dispose of batteries properly. Check with your
local government authority for details regarding
recycling or disposing of your old battery, or
contact your support representative at
1-800-8FUJITSU (1-800-838-5487).
134
Optional Zip Drive (standard with E370)
The Zip drive, using removable Zip disks with
a capacity of 100MB, can be installed in Multi-
function Bay 2 only.
The first time you use a Zip drive on your
LifeBook E Series notebook, you should install
the Zip Tools software onto your system.
Installing the Zip Tools software.
1. Insert the Zip drive in Multi-function
Bay 2 as described on page 130.
2. Insert the Zip Tools disk into the Zip drive.
3. Use the Run command from the Windows
Start menu to run d:\install from the Zip
drive. Note that your system may assign
a drive designator other than d: to the
Zip drive.
4. Select your language preference and follow
the instructions that appear on the screen.
P O I N T
You may receive the following error while
installing the Zip Tools software: "No
Iomega drives found." Select OK. The
installation process will continue correctly.
Figure 5-7 Zip Drive