Aqua Lung 397094 User Manual page 16

16
BD BUOYANCY COMPENSATOR USER'S MANUAL
2. Wet the cylinder band and then slide it over the cylinder so that the BC is
at the desired position in relation to the cylinder valve. Make sure the cylinder
valve air outlet is facing the back of the BC.
3. While holding the cylinder secure, pull
the free end of the cylinder band until there
is a very tight fit between the pack and the
cylinder.
4. Close the buckle half way to hold the
cylinder band taut, and thread the free end
of the band through the open slot in the end
of the cam buckle.
5. Pull the cam buckle closed so that it lies flat against the cylinder. Secure
the end of the cylinder band with the hook & loop attachment.
6. Check that the cylinder band is secure by pulling on the band while holding
down the cylinder at the valve. If the cylinder band moves, it is too loose. Repeat
steps 1-5 to tighten and secure the cylinder band.