Changing/Consulting Settings; Event Settings - Programming A Weekly Schedule - Raychem nVent User Manual

5. Changing/consulting settings

5.1 Event settings - programming a weekly schedule

The Event settings are used in order to program or adapt a weekly schedule used in the Event
Mode.
Programming the weekly schedule is done in 3 steps:
Step 1: Select a day or a sequence of days to program.
Step 2: Program up to 6 periods for this day:
Period 1:
 Duration = From 00:00 to XX:XX
 Temperature = XX,X ° C
Figure 9
Figure 10
8