Description - Raychem nVent User Manual

1. Description

The electronic under floor heating thermostat has already been set up to function in a way which
gives you the best possible comfort at the lowest possible energy consumption.
This user guide only has to be used in case of power failure or other unforeseen events which call
for e.g. a reinstallation of the thermostat's factory settings, or if you wish to change the set
temperature and on/off periods.
The thermostat switches the floor heating on and off to reach the set temperature. When the
thermostat is switching on the floor heating, this symbol is visible on the display:
The thermostat controls the electrical floor heating in 3 different working modes:
Working Mode
Constant Mode
Event Mode
Boost Mode
Table 1
Description
In the Constant Mode, the thermostat is aiming for
one temperature around the clock.
You can easily adapt this set temperature by using
the +/- button.
In the Event Mode, the thermostat is working
according to a weekly schedule. The Event Mode is
created in order to maximize the comfort while
minimizing the energy consumption of your
electrical floor heating system.
The Boost Mode is a temporary override of the
Constant Mode or the Event Mode.
This means by activating the Boost Mode, you can
temporarily step away from another working mode
and choose a temporary set temperature and
duration for the Boost Mode.
After this duration, the thermostat will automatically
switch back to the last used Mode (Constant or
Event).
Symbol
eller
3