Table of Contents
Advertisement
c. Remove the M.2 solid-state drive.
d. Remove the film that covers the thermal pad, if any. Then, install the M.2 solid-state drive.
e. Install the heat sink with the M.2 solid-state drive.
f. Insert the stopper.
5. Reinstall all the removed parts. Then, reconnect the power cord and all disconnected cables to the
computer.
M.2 solid-state drive bracket
Prerequisite
Before you start, read Appendix A "Important safety information" on page 73 and print the following
instructions.
.
Chapter 7
CRU replacement
59
Advertisement
Table of Contents
