Table of Contents
Advertisement
6. Install the optical drive bracket.
7. Install the optical drive.
8. Connect the signal and power cable to the new optical drive.
9. Reinstall all the removed parts. Then, reconnect the power cord and all disconnected cables to the
computer.
Drive bay assembly
Prerequisite
Before you start, read Appendix A "Important safety information" on page 73 and print the following
instructions.
Replacement procedure
1. Remove the computer cover. See "Computer cover" on page 43.
2. Remove the front bezel. See "Front bezel" on page 44.
.
Chapter 7
CRU replacement
47
Advertisement
Table of Contents
