Table of Contents
Advertisement
• Replace the internal storage drive only for upgrade or repair. The internal storage drive is not designed for
frequent changes or replacement.
• Before replacing the internal storage drive, make a backup copy of all the data that you want to keep.
• Do not touch the contact edge of the internal storage drive. Otherwise, the internal storage drive might get
damaged.
• Do not apply pressure to the internal storage drive.
• Do not make the internal storage drive subject to physical shocks or vibration. Put the internal storage
drive on a soft material, such as cloth, to absorb physical shocks.
3.5-inch primary storage drive
1. Remove the computer cover. See "Computer cover" on page 43.
2. Remove the front bezel. See "Front bezel" on page 44.
3. Remove the drive bay assembly. See "Drive bay assembly" on page 47.
4. Disconnect the signal cable and the power cable from the 3.5-inch primary storage drive on the bottom
of the drive bay assembly.
5. Remove the 3.5-inch primary storage drive with the bracket.
6. Remove the 3.5-inch primary storage drive.
.
Chapter 7
CRU replacement
49
Advertisement
Table of Contents
