Table of Contents
Advertisement
• Show only on 2: Display the video output only on an external display.
If you show programs using DirectDraw or Direct3D
video output.
Change display settings
1. Right-click a blank area on the desktop and select Display settings.
2. Select the display that you want to configure.
3. Change display settings of your preference.
You can change the settings for both the computer display and the external display. For example, you can
define which one is the main display and which one is the secondary display. You also can change the
resolution and orientation.
Note: If you set a higher resolution for the computer display than the external display, only part of the screen
can be displayed on the external display.
®
in full-screen mode, only the main display shows the
Chapter 2
.
Get started with your computer
11
Advertisement
Table of Contents
