Table of Contents
Advertisement
RRU3203
Installation Guide
11.1 Adding OT Terminals to the RRU Power Cable on the
RRU Side
This section describes the procedure for adding OT terminals to the RRU power cable on the
RRU side.
Context
Figure 11-1
Figure 11-1 Cable diagram on labels
(1) Cable diagram on labels
Procedure
Step 1 Determine the length of the power cable for different operations based on the labels, as shown
in
Figure
Figure 11-2 Determining the length of the power cable
Step 2 Strip the specified length of the sheath and shield layer off the power cable, as shown in
11-3.
Issue 06 (2012-04-16)
shows the cable diagram on labels.
11-2.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11 Appendix
Figure
87
Advertisement
Table of Contents
