Remote Door Locks; Active Or Passive Arming; Ignition Door Locks; Runtime - Fortin RM912 Manual

Security system only remote car starter only security system and remote car starter automatic / manual transmission - 2-way remotes
Table of Contents

Advertisement

REMOTE DOOR LOCKS

If the Remote-Starter is installed with door locks, you will be able to lock and unlock the vehicle without
using the key or OEM key fob.
To UNLOCK the doors and DISARM the Alarm:
Press the button twice
for 0.5 second. The
remote Green Led
fl ash and beep once
to confi rm.
To LOCK the doors and ARM the Alarm:
Press the button
for 0.5 second. The
remote Green Led
fl ash and beep once
to confi rm.

ACTIVE OR PASSIVE ARMING

Passive Mode will allow the Alarm to automatically rearm itself 60 seconds after it is disarmed if no
door(s) (or trunk) are open(ed). Opening a door before the 60 seconds has expired will reset the timer
but will also prevent the Alarm from locking the doors. This option is enabled by default and the Alarm
will never arm as long as at least one door is left open. When this feature is disabled the Alarm is con-
sidered to be in Active Mode which requires the remote transmitter to arm the Alarm.
Note: The automatic rearm can be deactivated by executing the UNLOCK function two times.

IGNITION DOOR LOCKS

Ignition Door Locks is an automatic passenger safety feature. When enabled the Remote-Starter/Alarm
will automatically LOCK the vehicles doors once the key is turned to the ignition (ON/RUN) position
and the brake pedal is pressed. The Remote-Starter/Alarm will also automatically UNLOCK the vehicles
doors once the key is turned to the OFF position.

RUNTIME

On gas engines the Remote-Starter can run the vehicle for either 3, 7 or 15 (default) minutes. On diesel
engines the Remote-Starter can run the vehicle for either 6, 15 or 30 (default) minutes.

ALARM

AUDIBLE CONFIRMATION

By default the Alarm will not send an audible confi rmation (horn/siren) after the fi rst signal has been
received from the remote transmitter(s).
SILENT : Execute the function one time (lock or unlock) and the park lights will fl ash, but the horn/
siren will NOT confi rm the signal.
AUDIBLE : Execute le function two times (lock or unlock) consecutively the park lights will fl ash, and
the horn/siren will confi rm the signal.
The Alarm can be programmed to audibly confi rm the signal on the fi rst button press. (See Installation
Guide).

ALARM ACTIVITY

The following characteristics enhance your vehicle's security :
If the Alarm system is active and the horn/siren is sounding :
• Execute the UNLOCK function ONCE to stop the alarm sound. The Alarm will remain active and
The parking lights will fl ash twice and the LED will turn OFF to
confi rm the signal. The Starter-Kill will also deactivate allowing
the vehicle to be started with the key. If UNLOCK is pressed
again (consecutively) the horn will honk twice (if installed) to
confi rm. Note: The system can be confi gured during installation so
the horn confi rms UNLOCK on the fi rst attempt.
The parking light will fl ash once and the LED will turn ON to
confi rm the signal. The Starter-Kill will activate preventing the
vehicle from being started with the key. If LOCK is pressed
again (consecutively) the horn will honk once (if installed) to
confi rm. Note: The system can be confi gured during installation so
the horn confi rms LOCK on the fi rst attempt.
Page 10 / 12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rem912Ant900Rm942

Table of Contents