Idis DirectIP DR-2304P Quick Manual page 14

Device Registration
To use the functions provided by IDIS Center, you must first
register a device and add the device to a device group.
1
Select System > IDIS Center Setup > Device in the
menu at the top of the screen.
2
On the Site panel, click on All Devices, then click on
the button at the bottom of the Site List panel on
the right. A Device Scan window will appear on the
screen.
E
3
After selecting a scan mode, click on Start Scan
button and the scan results will be displayed on the
list.
4
Click Add Devices at the bottom of the Device Scan
window.
14
5
When user authentication window appears, enter the
User ID and Password set up on each device, and then
select OK for remote access.
6
Click Device Group on the Sites panel and click
the bottom. Add Device Group window will appear.
● Name: Enter a name for the device group.
● Location: Select an location for the subject device
group.
When you select a device from the device List on the
left, it will be added to the Selected Device List on
the right. Click OK to register the device group.
7
Make sure that the device has been added to the
device group correctly. Click Device Group on the
Sites panel and click on next to Device Group. When
you click on a registered device group, a list of devices
added the selected device group will be displayed on
the right.
To modify a device group that has been registered,
select a device group and click
the Sites panel. Modify Device Group window will
appear. You can modify the selected device group
from this window.
at
E
on the bottom of
E