Idis DirectIP DR-2304P Quick Manual page 10

Apply/Cancel Buttons
While in Camera Registration mode, select Apply to register
all changes.
Select Cancel to exit Camera Registration mode without
applying the changes.
It is not possible to register a camera that has already
been registered to a different NVR.
Login
Configuring the NVR's settings and accessing its searching
and other functions require an authorized user login.
1
Bring up the Live menu and either press the Setup
button on the remote control or click on
the mouse to log in.
2
Select a user, enter the password, and then
select OK.
• Leaving the admin account unassigned with
a password poses a security risk. Please assign
a password at your earliest convenience. A
warning message will continue to be displayed
until a password is assigned.
• Click on the
field using the mouse. This will bring up a
virtual keyboard you can use to assign a
password.
3
To log out, bring up the Live menu and click on
icon using the mouse.
10
icon using
button next to the password
Find Password
1
Enter a user, registered email and then select Get
Verification Code.
2
Enter Verification Code and select OK.
• Select the question mark button at the
bottom left corner of the screen to refer to the
passoword settings instructions.
• The password must be entered only with the
virtual keyboard.
• FEN service must be enabled to use find
password function.
3
Enter an UPR(User Password Reset) verification and
then click on UPR Verification button.
4
Select the UPR file and then click on Import button.
• To use UPR function, the UPR file must be saved
in advance.
• You can reset the password using an encrypted
UPR (User Password Reset; filname extension
* .upr) file.
• It can be used as USB flash driver on local pc,
but not remotely.
• Only files exported from the same device are
available.
• If you lose the UPR file and change the
password of the NVR, the UPR file may not be
used.