Bridge Configuration - SAGEMCOM FAST1704 User Manual

Error! Style not defined.

3.3.2 Bridge Configuration

This section describes the procedure for adding PVC 0/35 (IPoA
mode).
Click Add, and the following page appears. In this page, you can
modify VPI/VCIs, service categories, and QoS.
In this example, PVC 0/35 is to be modified and the default values of
service category remain. In actual applications, you can modify them
as required.
After proper modifications, click Next and the following page
appears.
In this page, you can modify the Internet connection type and
encapsulation type.
14
Error! Style not defined.
Click Next and the following page appears.
In this page, you can modify the service name.
Enable Bridge Service: Enable it, unless you do not want to active
the PVC.
Click Next and the following page appears.
This page shows all the configuration.
15