Cancel Copying - Canon IR1600 Copying Manual

NOTE
If there is a current job, the machine scans the original, and waits to print it. Printing starts when the current job is
completed.
When scanning is completed, remove the original.
If you have set the Department ID Management, press
If the optional Card Reader is attached, remove the control card. (See the Reference Guide.)
1
When you want to reserve a copy job while the machine is printing:
Place the original and press
p. 1-23.)
When you want to cancel a copy job:
Press

CANCEL COPYING?

< YES
Press
NOTE
After you have pressed
You can also stop a copy job in the Monitor screen. (See the Reference Guide.)
When you want to interrupt a copy job:
To interrupt a copy job when you need to make priority copies, press
For instructions on explaining how to interrupt a copy job, see "Interrupting the Current Job
to Make Priority Copies (Interrupt Mode)," on p. 1-25.
1-6 Flow of Copy Operations
(start). (See "Reserving a Copy Job While Printing," on
(Stop).
or to select <YES> or <NO>.
(Stop), several copies may be output from the machine.
. (See the Reference Guide.)
ID
NO >
(Interrupt).