Table of Contents
Advertisement
Quick Links
SOUTHERN ENTERPRISES INC.
RELAX...If you can follow a few easy, step-by-step directions
in order .YOU CAN ASSEMBLE THIS ITEM.
PLEASE FIND HARDWARE IN RED POLYBAG BEFORE DISCARDING PACKING MATERIA L.
(1) WOOD DOWELS
(2) CAM-BOLTS
(3) CAM-LOCKS
(4) COVERS
(5) WASHERS
(A) FRONT PANEL
(B) BACK PANEL
(C) LEFT SIDE PANEL
STYLE NO.
MISSION CORNER DESK
HARDWARE LIST
32PCS
(6) LONG MACHINE SCREWS
23PCS
(7) LARGE WOOD SCREWS
23PCS
(8) HINGE
23PCS
(9) SMALL WOOD SCREWS
8PCS
(10) PLASTIC COVER
PARTS LIST
1PC
(I) RIGHT SIDE FRAME
圓頭
8x45mm
1PC
(J) BACK SUPPORT LEG
1PC
(K) LOWER LEFT CROSS BRACE
HO6041
圓頭
8x45mm
圓頭
8x32mm
8PCS
8PCS
圓頭
8x32mm
2PCS
12PCS
1PC
1PC
1PC
1PC
Advertisement
Table of Contents
Related Manuals for SEI HO6041
Summary of Contents for SEI HO6041
- Page 1 HO6041 STYLE NO. MISSION CORNER DESK SOUTHERN ENTERPRISES INC. RELAX...If you can follow a few easy, step-by-step directions in order .YOU CAN ASSEMBLE THIS ITEM. PLEASE FIND HARDWARE IN RED POLYBAG BEFORE DISCARDING PACKING MATERIA L. HARDWARE LIST (1) WOOD DOWELS...
- Page 2 (D) RIGHT SIDE PANEL (L) LEFT SHELF (E) TOP PANEL (M) UPPER LEFT CROSS BRACE (F) LOWER RIGHT CROSS BRACE (N) LEFT SIDE FRAME (G) RIGHT SHELF (O) KEYBOARD SHELF (H) UPPER RIGHT CROSS BRACE (P) FRONT CROSS BRACE ASSEMBLY INSTRUCTION SELECT A SMOOTH, SOFT SURFACE TO PREVENT SCRA TCHING FINISH.
- Page 3 FIGURE 1 FIGURE 2 FIGURE 3 INSERT WOOD DOWEL (1) INTO PREDRILLED HOLE ON LOWER RIGHT CROSS BRACE (F) AND FIT INTO CORRESPONDING HOLE ON RIGHT SHELF (G). AS SHOWN IN FIGURE 4. INSERT WOOD DOWELS (1), CAM-BOLTS (2) INTO PREDRILLED HOLES ON RIGHT SIDE FRAME (I) AND FIT INTO CORRESPONDING HOLES ON ENDS OF PARTS (F, G, H).
- Page 4 FIGURE 4 FIGURE 5 FIGURE 6 ASSEMBLE PARTS (K, L, M, N) IN SAME MANNER AS STEP 6-8. AS SHOWN IN FIGURES 7, 8 & 9. FIGURE 7 FIGURE 8...
- Page 5 FIGURE 9 10. PUT TOP UNIT UPSIDE DOWN, INSERT WOOD DOWELS (1), CAM-BOLTS (2) INTO PREDRILLED HOLES ON UNDERSIDE OF TOP PANEL (E), WITH AN ASSISTANT, FIT WOOD DOWELS (1), CAM-BOLTS (2) INTO CORRESPONDING HOLES ON PARTS (H, I, M, N),. INSERT CAM-LOCKS (3) INTO LARGE HOLES ON (H, M) WITH ARROW FACING TOWARDS HOLE.
- Page 6 (within 9 months), we are under no obligation to provide parts or replacement merchandise. Parts will not be available for items arriving fully assembled. "We will ship parts if available" "This is not a warranty" PARTS REPLACEMENT FORM STYLE NO HO6041 Customer Name PART S PART QUANT IT Y...
Need help?
Do you have a question about the HO6041 and is the answer not in the manual?
Questions and answers