Setting Up And Terminating Calls; Outgoing Calls - Funkwerk GSM-R User Manual

Trackside Worker GSM-R User Guide
6

Setting up and Terminating Calls

To make a call on the phone dial the required number and press the send button.
The "Establishing call" message and the corresponding pictogram of the call destination
appear in the display filed.
The call can be ended at any time by pressing the exit button.
6.1

Outgoing Calls

10 March 2015
th
Call on number dialled
1. Enter the number
initial state.
2. Push the send button
The connection is established. The display shows the call
number and the dialing symbol.
3. Listen and speak like a conventional mobile phone.
Call from the phonebook
1. Open the menu Phonebook  Phonebook entry [x].
2. Push the send button
Or 2. Press the left-hand selection button Select.
3. Select the entry Call.
4. Confirm with the left-hand selection button Select.
The display shows the call number and the dialing symbol.
NOTE:
Call to Rail Net extensions use 901 XXX XXXXX
Calls to fixed terminals use functional numbers 7XXX XXXX
to using the keyboard to the
.
.
Page 14