Switch On / Off Handheld - Funkwerk GSM-R User Manual

Trackside Worker GSM-R User Guide
5.2

Switch on / off Handheld

Switch on
Trackside GSM-R Hand held
Switch off
Note:
10 March 2015
th
Note:
The battery must be fully charged before using the handheld for the
first time.
Press the Exit button
The display and keypad light-up. The handheld performs a self-
test. This can take several seconds.
Enter the PIN provided with the phone.
Confirm with the left-hand selection button OK.
The handheld is now ready to use.
1. Press and hold down the Exit button
2. Confirm with the left-hand selection button Yes.
3. The handheld disconnects from the network and powers
down.
4. Charge the battery.
While the handheld is switched off the battery will slowly discharge.
Regularly recharge the battery if stored for any length time before taking it for
trackside use.
.
for 3-4 seconds.
Page 10