Appendix F - Rs232 Communications (If Equipped) - Kanomax 6824 User Manual

219 Route 206
PO Box 372
Andover, NJ 07821 USA
APPENDIX F – RS232 COMMUNICATIONS (IF EQUIPPED)
If the instrument is equipped with the RS232 Communications option, there will
be a three pin male connector on the bottom of the instrument. Also, an RS232
cable will be included with the instrument. This cable will have a three pin
female connector on one end and a DB9 Female connector on the other end.
RS232 Data Output – Instructions for Use
STEP 1: Connect the RS232 cable (included) to the female connector on the
bottom of your instrument. Connect the other end to an RS232 port
on your computer.
STEP 3: Turn the Instrument ON.
STEP 4: Verify that the Instrument has been set up as a RS232 Serial Port
with a unique COM port number. (You only need to do this once).
For Windows users, open the Windows Device Manager (found in
Control Panel) and verify that a serial port exists.
You are now ready to capture the data being measured by your
instrument.
Please refer to Appendix G – Viewing and Capturing Data for
further instructions.
6824 ™ User Manual, PN 10283
Rev 1.0, 30-July-2021
Copyright © 2021, Kanomax USA, Inc.
TM
Phone: 1-800-247-8887
Fax: (973) 786-7586
info@kanomax-usa.com
Kanomax USA, Inc
www.kanomax-usa.com
Page 20 of 28