Kanomax 6824 User Manual page 12

219 Route 206
PO Box 372
Andover, NJ 07821 USA
Press the TEMPERATURE key to display the current temperature of
the air stream as measured by the Air Probe. To switch the units
between degrees Fahrenheit (°F) and degrees Celsius (°C), press
the TEMPERATURE key again. Either °C or °F will be displayed along with
the reading.
Press the FPM/MPS key to display the current air velocity as measured
by the air probe. To switch the measurement units from FPM (feet per
minute, 1 FPM resolution) to MPS (meters per second, 0.01 MPS
resolution), press the FPM/MPS key again. Either FPM or MPS will be
displayed along with the reading.
Press the SAMPLE RATE key to change the measurement averaging
rate ("sample rate") of the instrument for air velocity only.
SEC
SEC
SEC
SEC
Note: The sample rate for temperature readings is always 2 seconds.
6824 ™ User Manual, PN 10283
Rev 1.0, 30-July-2021
Copyright © 2021, Kanomax USA, Inc.
TM
An average value of airspeed measurements during the
preceding 2 seconds is displayed.
An average value of airspeed measurements during the
preceding 4 seconds is displayed.
An average value of airspeed measurements during the
preceding 8 seconds is displayed.
An average value of airspeed measurements during the
preceding 16 seconds is displayed.
Phone: 1-800-247-8887
Fax: (973) 786-7586
info@kanomax-usa.com
Kanomax USA, Inc
www.kanomax-usa.com
Page 12 of 28