Tait TP9310 User Manual page 43

Pairing a Bluetooth device with the radio
43 Operation
3 Avoid coming in contact with the internal antenna
of a headset or radio.
Before attempting to connect a device, Tait
recommends that the device is fully charged.
Refer to the documentation of your Bluetooth
device for charging instructions.
Pairing creates a unique and encrypted wireless link
between the radio, and the Bluetooth device. To use
a device with your radio, they must first be paired.
When you connect to a Bluetooth device for the first
time, you need to instruct the radio to search for
compatible devices using Bluetooth wireless
technology. The search should take less than one
minute.
Do not turn off your Bluetooth device or press
the right selection key during the finding and
connecting operation as this cancels the
operation.
A pin code may be required to be programmed in your
radio before it can pair with some devices. Contact
your dealer for more information.
16-key and 4-key radios
1 Turn on your Bluetooth device and place it in
pairing mode. Refer to the documentation of your
Bluetooth device.
2 On your radio, press Menu and
select Accessories.
3 Select Bluetooth >
My Devices.
If you cannot see My Devices, turn on the
BT On/Off setting.
4 Scroll to the required device and press Select.
You can also use Search Devices to locate
available devices.
Accessories
GPS
Bluetooth
Select Back