Cover Plate Drawing; Table 48 Cover Plate Dimensions [Mm] - ABB A135-M56 Operation Manual

Operation Manual / 4 Product description / A130-M.. - A145-M..
9 Taking out of operation at short notice
9.5

Cover plate drawing

The cover plate is not included in the ABB Turbo Systems scope of delivery and must be
manufactured by the operating company according to the following drawing.
Material: General structural steel, in compliance with DIN EN 10025-2.
Figure 55: Cover plate drawing
Product B1 B2
± 0.5
A130 65.7 60
A135 79.6 80
A140 98.2 102
A145 116.8 120
Table 48: Cover plate dimensions [mm]
© Copyright 2016 ABB. All rights reserved.
B3 B4 B5
± 0.2
130 11.7 1.4
155 14.2 1.6
190 17.2 2.0
226 20.5 2.4
HZTL4031_EN
B6 B7 ØD1
± 0.2
150 35.7 227.7
180 39.6 271.7
220 48.2 332.5
260 56.8 395.9
Revision D
Page 106 / 117
ØD2 R1 M
17 ≤ 105 M8
21 ≤ 125 M8
25 ≤ 153 M10
31 ≤ 182 M10
June 2016