Removing The Nozzle Ring - ABB A135-M56 Operation Manual
Hide thumbs
Also See for A135-M56:
- Operation manual (152 pages) ,
- Operation manual (152 pages) ,
- Operation manual (152 pages)
Table of Contents
Advertisement
Operation Manual / 4 Product description / A130-M.. - A145-M..
8
Dismantling and fitting
8.9
Removing the nozzle ring
Figure 39: Removing the nozzle ring
1. Place the fastening strips (51002) under the nozzle ring.
2. Pull out the nozzle ring (56001) with the two extraction devices (90070) and the service
support base (90012).
3. Remove the lamellar sealing ring (56005).
4. Remove the burst ring (57210).
© Copyright 2016 ABB. All rights reserved.
HZTL4031_EN
Page 87 / 117
Revision D
June 2016
Advertisement
Table of Contents
