Cover Plate Drawing; Fig. 46: Cover Plate Drawing; Table 53: Cover Plate Dimensions [Mm] - ABB PT003924 Operation Manual

Operation Manual / Power2 340-H / Low-pressure stage
10 Taking out of operation at short notice / 10.4 Cover plate drawing
10.4

Cover plate drawing

The cover plate is not included in the Turbo Systems scope of delivery and must be manufac-
tured by the operating company according to the following drawing.
Material: General structural steel, in accordance with DIN EN 10025-2.
Fig. 46: Cover plate drawing
B1 B2 B3 B4 B5 B6 B7 ØD1 ØD2 R1 M
± 0.5 ± 0.2 ± 0.2
98.2 102 190 17.2 2 220 48.2 332.5 25 ≤ 153 M10
Table 53: Cover plate dimensions [mm]
© Copyright 2022 ABB. All rights reserved. HZTL4053_EN Rev.F March 2022