Installing The Gas Outlet Flange; Installing The Gas Outlet Casing; Table 45 Tightening Torque (51009) - ABB A135-M56 Operation Manual

Operation Manual / 4 Product description / A130-M.. - A145-M..
8 Dismantling and fitting
8.18

Installing the gas outlet flange

Figure 50: Installing the gas outlet flange
1. If present: Insert the metal C-ring (57003) into the turbine casing (51000) and secure with
high-vacuum grease.
2. Install the gas outlet flange (57002) in the turbine casing.
3. Measure radial clearance (R) (see chapter Radial clearances N and R).
8.19

Installing the gas outlet casing

Figure 51: Installing the gas outlet casing
Part number
51009
Table 45: Tightening torque (51009)
1. Insert a new gasket (61002) into the gas outlet casing (61001).
2. Attach the lifting gear to the gas outlet casing (61001) and position the gas outlet casing in
the correct position on the turbine casing (51000).
3. If present: Fit the support (61301).
4. Fit and tighten the hexagon nuts (51009).
© Copyright 2016 ABB. All rights reserved.
A130 A135
M8 M10
20 Nm 40 Nm
HZTL4031_EN
Page 99 / 117
A140 A145
M12 M12
65 Nm 65 Nm
Revision D June 2016