4. Installation
I nstruction
way that may clock air flow. And, more than 1 meter away from any antenna or power lines or
connecting wires used for TV, radio, telephone, security system, or intercom. Electrical noise from any of
these sources may affect operation.
4-‐1.
I nstallation
P lace
a nd
C ondition
Indoor unit
Avoid:
△ direct sunlight.
△ nearby heat sources that may affect performance of the unit.
△ areas where leakage of flammable gas may be expected.
△ places where large amounts of oil mist exist.
Do:
△ Select an appropriate position from which every corner of the room can be uniformly cooled.
△ Select a location that will hold the weight of the unit.
△ Select a location where tubing and drain hose have the shortest run to the outside. (See a)
△ Allow room for operation and maintenance as well as unrestricted air flow around the unit. (See b)
△ Install the unit within the maximum elevation difference (H) above or below the outdoor unit and
within a total tubing length (L) from the outdoor unit as detailed (See table 1 and c)
To prevent abnormal heat generation and the possibility of fire, do not place
obstacles, enclosures and grilles in front of or surrounding the air conditioner in a
18