Table of Contents
Advertisement
DWR-980
CONNECTING TO PC
PC with Ethernet Adapter
1. Connect an Ethernet cable between any of LAN ports located on the back
panel of the router and the Ethernet port of your PC.
2. To connect via built-in modem: insert a SIM card into the slot on the left
side panel of the router with the gold contacts facing towards the front of
the device and gently push until it clicks.
If you need to connect a SIM card or change it to another one when the
!
router is powered on, power off the router, insert or change the SIM
card, and power on the router.
3. To connect the router to a DSL line: connect a phone cable between the
phone jack and the DSL port of the router.
4. To connect the router to an Ethernet line: connect an Ethernet cable
between the WAN port of the router and the Ethernet line.
5. Connect another phone cable between an FXS port of the router and the
phone.
6. Connect the power cord to the power connector port on the back panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
7. Turn on the router by moving the POWER switch on its back panel to the
ON (I) position.
Then make sure that your PC is configured to obtain an IP address
automatically (as DHCP client).
Quick Installation Guide
5
Advertisement
Table of Contents
