Agilent Technologies 10400B Series User Manual page 18

Safety
This apparatus has been
designed and tested in
accordance with IEC
Publication 1010, Safety
Requirements for
Measuring Apparatus, and
has been supplied in a safe
condition. To ensure safe
operation and to keep the
product safe, the
information, cautions, and
warnings in this operating
manual must be heeded. In
addition, note the external
markings on the instrument
that are described under
"Safety Symbols."
Safety Symbols
!
Instruction manual symbol:
the product is marked with
this symbol when it is
necessary for you to refer to
the instruction manual in
order to protect against
damage to the product.
Hazardous voltage symbol.
Earth terminal symbol:
Used to indicate a circuit
common connected to
grounded chassis.
W A R N I N G
The Warning sign denotes a
hazard. It calls attention to
a procedure, practice, or
the like, which, if not
correctly performed or
adhered to, could result in
personal injury. Do not
proceed beyond a Warning
sign until the indicated
conditions are fully
understood and met.
C A U T I O N
The Caution sign denotes a
hazard. It calls attention to
an operating procedure,
practice, or the like, which,
if not correctly performed
or adhered to, could result
in damage to or destruction
of part or all of the product.
Do not proceed beyond a
Caution symbol until the
indicated conditions are
fully understood or met.
About this edition
This is the Agilent 10400B
Series Miniature Passive
Oscilloscope Probes User's
Guide.
Publication number
10433-92002, October 2006
Printed in USA.
Print history is as follows:
10433-92002, October 2006
10433-92001, Nov. 1999
10433-92000, Nov. 1998
New editions are complete
revisions of the manual.
Many product updates do
not require manual
changes; and, conversely,
manual corrections may be
done without accompanying
product changes.
Therefore, do not expect a
one-to-one correspondence
between product updates
and manual updates.