Agilent Technologies 10400B Series User Manual page 14

Agilent 10400B Series Miniature Passive Oscilloscope Probes
To operate the probe
The retractable hook tip.
4
Attach the hook tip to a probing point by pressing the retractable hook tip body
towards the probe body. Place the hook tip around the probing point, then
release the retractable hook tip body.
The retractable hook tip is used for most typical in-circuit probing and ICs.
The Agilent Wedge Probe Adapter
The Agilent Wedge Probe Adapter makes contact with legs of the IC under test
when the Agilent Wedge Probe Adapter conductors are inserted into the space
between the legs of the IC. If you are using the Agilent Wedge Adapter, refer to
the Agilent Wedge Adapter User's Guide.
Connecting the Probe to an Agilent Wedge Adapter
Agilent Wedge Adapters
Agilent Model Number Description
E2613A
E2613B
E2614A
E2615A
E2615B
E2616A
E2643A*
E2644A*
* 16-signal Agilent Wedge Probe Adapters include 3 removable jumpers
(Agilent part number 1258-0141 for quantity of 1 jumper)
14
One 0.5 mm x 3-signal wedge
Two 0.5 mm x 3-signal wedge
One 0.5 mm x 8-signal wedge
One 0.65 mm x 3-signal wedge
Two 0.65 mm x 3-signal wedge
One 0.65 mm x 8-signal wedge
One 0.5 mm x 16-signal wedge
One 0.65 mm x 16-signal wedge